Kendall® Industrial Gear Oil is a premium-quality, heavy-duty, extreme-pressure (EP) industrial gear oil developed for the lubrication of heavily loaded enclosed gear drives operating under moderate to severe service conditions. It is specially formulated with “clean gear” additive technology to minimize deposit formation and provide excellent gearbox cleanliness. It is recommended for use in all applications where the equipment manufacturer specifies an AGMA EP gear oil.
INDUSTRIAL GEAR OIL
Premium Extreme-Pressure Gear Oil
Links of Interest
Features & Benefits
- High load-carrying capacity for protection against scuffing and wear
- Excellent oxidation resistance and thermal stability
- Excellent deposit control for gearbox cleanliness
- Protects against rust and corrosion
- Fast water separation
- Quick foam release
Applications
- Enclosed industrial gear drives operating under heavy loads, high peak loads, or intermittent shock loads
- Enclosed spur, bevel, helical, herringbone, and planetary gear sets where the equipment manufacturer specifies an AGMA EP gear oil
- Heavily loaded plain and rolling-element bearings
Technical Details
- ISO Grade : 220
- ISO Grade : 150
- ISO Grade : 68
- ISO Grade : 220
- ISO Grade : 150
- ISO Grade : 68
Licenses & Approvals
Industrial Gear Oil meets the requirements of the following industry specifications:#ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP#Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220) (approved)#German Steel Industry SEB 181226, Type CLP#ISO 12925-1:1996, Type L-CKC#U.S. Steel 224
Additional Details
ISO Grade | 220 |
AGMA Grade | 5 EP |
Specific Gravity @ 60°F | 0.887 |
Density, lbs/gal @ 60°F | 7.39 |
Color, ASTM D1500 | 4.5 |
Flash Point (COC), °C (°F) | 252 (486) |
Pour Point, °C (°F) | -27 (-17) |
Viscosity, Kinematic | |
cSt @ 40°C | 220 |
cSt @ 100°C | 18.4 |
SUS @ 100°F | 1166 |
SUS @ 210°F | 94.2 |
Viscosity Index | 92 |
Acid Number, ASTM D974, mg KOH/g | 0.73 |
Copper Corrosion, ASTM D130 | 1a |
Foam Test, ASTM D892, Seq. I, mL | 0/0 |
Four-Ball EP, ASTM D2783, Weld Load, kgf | 250 |
Four-Ball Wear, ASTM D4172, Scar Diameter, mm | 0.3 |
FZG Scuffing Test, ASTM D5182, Failure Load Stage | >12 |
Timken OK Load, ASTM D2782, lb | 70 |
Licenses & Approvals
Industrial Gear Oil meets the requirements of the following industry specifications:#ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP#Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220) (approved)#German Steel Industry SEB 181226, Type CLP#ISO 12925-1:1996, Type L-CKC#U.S. Steel 224
Additional Details
ISO Grade | 150 |
AGMA Grade | 4 EP |
Specific Gravity @ 60°F | 0.884 |
Density, lbs/gal @ 60°F | 7.36 |
Color, ASTM D1500 | 4 |
Flash Point (COC), °C (°F) | 243 (469) |
Pour Point, °C (°F) | -33 (-27) |
Viscosity, Kinematic | |
cSt @ 40°C | 150 |
cSt @ 100°C | 14.4 |
SUS @ 100°F | 789 |
SUS @ 210°F | 77.3 |
Viscosity Index | 93 |
Acid Number, ASTM D974, mg KOH/g | 0.73 |
Copper Corrosion, ASTM D130 | 1a |
Foam Test, ASTM D892, Seq. I, mL | 0/0 |
Four-Ball EP, ASTM D2783, Weld Load, kgf | 250 |
Four-Ball Wear, ASTM D4172, Scar Diameter, mm | 0.3 |
FZG Scuffing Test, ASTM D5182, Failure Load Stage | >12 |
Timken OK Load, ASTM D2782, lb | 70 |
Licenses & Approvals
Industrial Gear Oil meets the requirements of the following industry specifications:#ANSI/AGMA Standard 9005-E02, Anti-Scuff/Anti-Wear (EP) Oils#DIN 51517 Part 3, Lubricating Oils, Type CLP#Fives Cincinnati P-77 (ISO VG 150), P-74 (ISO VG 220) (approved)#German Steel Industry SEB 181226, Type CLP#ISO 12925-1:1996, Type L-CKC#U.S. Steel 224
Additional Details
ISO Grade | 68 |
AGMA Grade | 2 EP |
Specific Gravity @ 60°F | 0.877 |
Density, lbs/gal @ 60°F | 7.3 |
Color, ASTM D1500 | 3 |
Flash Point (COC), °C (°F) | 235 (455) |
Pour Point, °C (°F) | -33 (-27) |
Viscosity, Kinematic | |
cSt @ 40°C | 68 |
cSt @ 100°C | 8.7 |
SUS @ 100°F | 353 |
SUS @ 210°F | 55.5 |
Viscosity Index | 99 |
Acid Number, ASTM D974, mg KOH/g | 0.73 |
Copper Corrosion, ASTM D130 | 1a |
Foam Test, ASTM D892, Seq. I, mL | 0/0 |
Four-Ball EP, ASTM D2783, Weld Load, kgf | 200 |
Four-Ball Wear, ASTM D4172, Scar Diameter, mm | 0.3 |
FZG Scuffing Test, ASTM D5182, Failure Load Stage | >12 |
Timken OK Load, ASTM D2782, lb | 65 |