ILSAC GF-6: COMING MAY 2020

A major change in passenger car motor oil is on the horizon, and Kendall® Motor Oil is working with Original Equipment Manufacturers (OEMs), the American Petroleum Institute (API), and the International Lubricants Standardization and Approval Committee (ILSAC) to develop new GF-6-approved products. Both installers and consumers will be affected by the new specifications hitting the market. Kendall Motor Oil has developed a series of educational videos and FAQs to provide insight into the new formulations and why they are necessary.

  • GF-6 Introduction

    The most significant changes to the passenger car motor oil category in more than a decade are coming with the GF-6 specification. Learn what that means for you.

  • Engine Designs

    GF-6 engine oils have been formulated to support the advances of modern engine design with an improvement in fuel efficiency and increased wear protection.

  • Environment

    A primary driver for the industry to move toward GF-6 is to reduce greenhouse gas emissions while increasing fuel efficiency and wear protection.

  • GF-6 Preparation

    Shaping GF-6 into what it is today meant a lot of discussion with OEMs, industry formulators and oil producers. Kendall was involved every step of the way during GF-6 development.

FAQ

1. What is GF-6 passenger car automotive specification?

ILSAC GF-6 and API SP are new automotive specifications being developed by Original Equipment Manufacturers (OEMs) and members of the American Petroleum Institute (API). These oil specifications represent the next iteration of improved oil specifications designed to meet the demands of modern engine technology. Unlike previous iterations, ILSAC GF-6 will be separated into two categories, A and B. ILSAC GF-6A will be backwards compatible to previous ILSAC GF-5 specifications using grades such as SAE 5W-30 and 0W-20, while ILSAC GF-6B will showcase the introduction of lower viscosity oils such as SAE 0W-16.

2. What is driving this category update?

Original Equipment Manufacturers (OEMs) are responding to increased demands from government regulators and the market for increased fuel efficiency, reduced emissions, and improved engine performance and durability. The primary pathway to meet these demands is to make engineering changes to vehicle hardware. These vehicle modifications put additional stress on oils, so ILSAC GF-6 will show a step-change improvement in oil robustness and wear protection.

In addition, ILSAC GF-6B will introduce lower viscosity oils designed to provide additional fuel economy benefits and ultimately reduce emissions.

3. What is the timing for launch of GF-6 products?

The ILSAC GF-6 and API SP first license date will be May 1, 2020.

4. Will GF-5 oils still be produced?

The ILSAC GF-6A specification will replace the current ILSAC GF-5 specification, represented by the Starburst Certification Trademark. ILSAC GF-6A will be fully backwards compatible to ILSAC GF-5. A designation mark for ILSAC GF-6B is still under development but will be specific to low viscosity fluids.

5. How will this affect my day to day business? [Installers]

Installers should be aware of the first license date and actively ensure their lubricant suppliers will deliver ILSAC GF-6 and API SP oils shortly after first license date. These updated oils will be required to maintain warranty coverage for new vehicles.

6. How will this affect my vehicle? [Consumers]

If you have a new vehicle, ILSAC GF-6 oil will be required to maintain proper function and fuel economy. If you have an older vehicle, ILSAC GF-6 oil will provide additional protection for your vehicle. Consumers should continue to look for the ILSAC Starburst to ensure they are receiving oil that will provide the proper level of protection for their vehicles.

7. What are the key differences between GF-6A and GF-6B?

GF-6A and GF-6B differ only in viscosity grades. ISLAC GF-6A will be available in SAE viscosity grades 10W-30, 5W-30, 5W-20, and 0W-20 while ISLAC GF-6B will be available in SAE 0W-16.

8. Will lower emission vehicles and oils affect how lube shops need to service vehicles?

Lube shop owners will need to prepare to hold additional oils. As OEM recommendations shift from 5W-30 and 5W-20 to 0W-20 and 0W-16, lube shops will be expected to carry all the necessary viscosity grades.

9. What is Kendall Motor Oil doing to prepare for the update?

Kendall Motor Oil is very involved in the development of ILSAC GF-6 and API SP through our joint development work with OEMs and our participation in API committees. Kendall Motor Oil is working hard to develop advanced lubrication technologies and prepare for implementation at first license date.

FOR MORE INFORMATION, CALL THE KENDALL MOTOR OIL TECHNICAL HOTLINE AT 877.445.9198