Skip to main content

MARINE 2-CYCLE MOTOR OIL

Ashless Engine Oil for 2-Stroke Cycle Engines, NMMA TC-W3® Certified

Kendall® Marine 2-Cycle Motor Oil is a high-quality, ashless engine oil specially designed for use in water-cooled and most air-cooled 2-stroke cycle engines. It is TC-W3® certified by the National Marine Manufacturers Association (NMMA), and also meets API TC and JASO FB performance requirements for use in air-cooled 2-stroke cycle engines. It is recommended for use in low- to mid-horsepower (up to 115 HP) engines, and may be used in either direct oil injection or premix engines.

MARINE 2-CYCLE MOTOR OIL

Features & Benefits

  • Meets all outboard and personal watercraft manufacturers warranty requirements where a TC-W3 oil is specified
  • Ashless dispersant/detergent formulation helps minimize engine deposits and pre-ignition
  • Minimizes piston ring sticking and helps reduce exhaust port blocking
  • Protects against piston and cylinder scuffing
  • Good lubricity
  • Reduces spark plug fouling
  • Good rust and corrosion protection
  • Keeps engine parts clean
  • Mixes easily with gasoline at low temperatures
  • Dyed for easy visibility when mixed with gasoline
  • Suitable for either direct oil injection or premix engines(1)

    (1)Note: For premix engines, always follow the manufacturer’s recommendations for choosing the proper fuel-to-oil mixing ratio

Applications

  • Outboard marine engines
  • Personal watercraft
  • Motorcycles, scooters, and all-terrain vehicles (ATVs)
  • Snowmobiles
  • Low-output chain saws
  • Lawn-care equipment (mowers, weed trimmers, leaf blowers)

Technical Details

Licenses & Approvals:

Marine 2-Cycle Motor Oil is licensed under the following industry specification:

  • NMMA TC-W3 (Certification No. RL-13129R)
Marine 2-Cycle Motor Oil meets or exceeds the requirements of:

  • API TC
  • JASO FB
  • NMMA TC-WII®, TC-W® (obsolete specifications)

Additional Details:

Specific Gravity@ 60°F 0.862
Density, lbs/gal @ 60°F 7.18
Color, ASTM D1500 Blue
Flash Point (COC), °C (°F) 102 (216)
Flash Point (PMCC), °C (°F) 81 (178)
Pour Point, °C (°F) -38 (-36)
Viscosity, Brookfield, cP @ -25°C 4,310
Viscosity, Kinematic
cSt @ 40°C 30.9
cSt @ 100°C 5.6
Sulfated Ash, ASTM D874, wt % <0.001