Skip to main content

GT-1® HIGH PERFORMANCE MOTOR OIL WITH LIQUITEK®

Premium Synthetic Blend Passenger Car Engine Oil; Formulated with LiquiTek

Kendall® GT-1 High Performance Motor Oil with LiquiTek is a high quality, part-synthetic automotive engine oil designed to provide excellent engine protection for turbocharged gasoline direct injection conventional and flex-fueled passenger cars and light trucks that perform under any operating condition.

GT-1 High Performance Motor Oil with LiquiTek is formulated with a blend of synthetic and conventional base stocks and with an exclusive performance additive package. The part-synthetic formulation provides increased oxidation resistance and thermal stability at high temperatures and better pumpability at low temperatures compared with conventional engine oils.

Our LiquiTek additive package provides increased engine protection by increasing engine cleanliness and reducing wear. Because this oil reduces friction, it helps improve fuel economy performance beyond ILSAC GF-6 requirements.

GT-1 High Performance Motor Oil with LiquiTek (except SAE 10W-40 and SAE 20W-50) exceeds new car warranty requirements as defined by ILSAC GF-6A. This engine oil is formulated to help combat low speed pre-ignition (LSPI) in turbocharged gasoline direct injection engines.

GT-1 High Performance Motor Oil with LiquiTek meets or exceeds “Resource Conserving” requirements for fuel economy improvement, emission system and turbocharger protection, and protection of engines operating on ethanol-containing fuels up to E85. GT-1 High Performance Motor Oil is backward serviceable for use where API SN or earlier “S” category engine oils are recommended.

GT-1® HIGH PERFORMANCE MOTOR OIL WITH LIQUITEK®

Features & Benefits

  • Helps protect against low speed pre-ignition (LSPI) in turbocharged gasoline direct-injection engines (TGDI)
  • Meets ILSAC GF-6A requirements for new cars under warranty (except SAE 10W-40 & 20W-50)
  • Part-synthetic formulation provides enhanced protection against deposit formation and oil thickening, compared with conventional engine oils
  • Protects against rust and bearing corrosion
  • Low volatility for reduced oil consumption
  • Excellent low-temperature pumpability for protection during cold starts
  • Highly resistant to foaming
  • Helps maximize engine performance and minimize exhaust smoke
  • Formulated to protect turbochargers and emissions control system catalysts
  • Formulated for use in vehicles operating on ethanol-containing fuels up to E85

Applications

  • Turbocharged gasoline direct-injection, conventional gasoline-fueled and flex-fuel passenger cars, light trucks and sport utility vehicles, including gasoline-electric hybrids, especially when operating under severe conditions
  • Four-stroke cycle gasoline engines in other mobile or stationary equipment

Technical Details

Licenses & Approvals:

GT-1 High Performance Motor Oil with LiquiTek is licensed for:

  • ILSAC GF-6A (except SAE 10W-40 and 20W-50)
  • API Service SP, SN PLUS with Resource Conserving (except SAE 10W-40 and SAE 20W-50 which are API SP, SN PLUS only)
GT-1 High Performance Motor Oil with LiquiTek meets or exceeds the requirements of:

  • Chrysler MS-6395
  • Ford WSS-M2C960-A1 (SAE 5W-20)
  • Ford WSS-M2C961-A1 (SAE 5W-30)
  • Ford WSS-M2C962-A1 (SAE 0W-20)
  • GM6094M (obsolete specification)

Additional Details:

SAE Grade 0W-20
Specific Gravity @ 60°F 0.848
Density, lbs/gal @ 60°F 7.07
Color, ASTM D1500 3.0
Flash Point (COC), °C (°F) 218 (424)
Pour Point, °C (°F) -34 (-29)
Viscosity, Kinematic
cSt @ 40°C 46.0
cSt @ 100°C 8.8
Viscosity Index 174
Cold Cranking Viscosity, cP 5,600
@ (°C) (-35)
High-Temp/High-Shear Viscosity, cP @ 150°C 2.6
Sulfated Ash, ASTM D874, wt % 0.8
Total Base Number (TBN), ASTM D2896 7.0
Phosphorus, wt % 0.077
Zinc, wt % 0.085

Licenses & Approvals:

GT-1 High Performance Motor Oil with LiquiTek is licensed for:

  • ILSAC GF-6A (except SAE 10W-40 and 20W-50)
  • API Service SP, SN PLUS with Resource Conserving (except SAE 10W-40 and SAE 20W-50 which are API SP, SN PLUS only)
GT-1 High Performance Motor Oil with LiquiTek meets or exceeds the requirements of:

  • Chrysler MS-6395
  • Ford WSS-M2C960-A1 (SAE 5W-20)
  • Ford WSS-M2C961-A1 (SAE 5W-30)
  • Ford WSS-M2C962-A1 (SAE 0W-20)
  • GM6094M (obsolete specification)

Additional Details:

SAE Grade 5W-20
Specific Gravity @ 60°F 0.862
Density, lbs/gal @ 60°F 7.19
Color, ASTM D1500 3.0
Flash Point (COC), °C (°F) 218 (424)
Pour Point, °C (°F) -30 (-22)
Viscosity, Kinematic
cSt @ 40°C 51.3
cSt @ 100°C 8.8
Viscosity Index 152
Cold Cranking Viscosity, cP 5,600
@ (°C) (-30)
High-Temp/High-Shear Viscosity, cP @ 150°C 2.6
Sulfated Ash, ASTM D874, wt % 0.8
Total Base Number (TBN), ASTM D2896 7.0
Phosphorus, wt % 0.077
Zinc, wt % 0.085

Licenses & Approvals:

GT-1 High Performance Motor Oil with LiquiTek is licensed for:

  • ILSAC GF-6A (except SAE 10W-40 and 20W-50)
  • API Service SP, SN PLUS with Resource Conserving (except SAE 10W-40 and SAE 20W-50 which are API SP, SN PLUS only)
GT-1 High Performance Motor Oil with LiquiTek meets or exceeds the requirements of:

  • Chrysler MS-6395
  • Ford WSS-M2C960-A1 (SAE 5W-20)
  • Ford WSS-M2C961-A1 (SAE 5W-30)
  • Ford WSS-M2C962-A1 (SAE 0W-20)
  • GM6094M (obsolete specification)

Additional Details:

SAE Grade 5W-30
Specific Gravity @ 60°F 0.862
Density, lbs/gal @ 60°F 7.19
Color, ASTM D1500 3.0
Flash Point (COC), °C (°F) 216 (421)
Pour Point, °C (°F) -30 (-22)
Viscosity, Kinematic
cSt @ 40°C 68.0
cSt @ 100°C 11.2
Viscosity Index 159
Cold Cranking Viscosity, cP 6,000
@ (°C) (-30)
High-Temp/High-Shear Viscosity, cP @ 150°C 3.1
Sulfated Ash, ASTM D874, wt % 0.8
Total Base Number (TBN), ASTM D2896 7.0
Phosphorus, wt % 0.077
Zinc, wt % 0.085

Licenses & Approvals:

GT-1 High Performance Motor Oil with LiquiTek is licensed for:

  • ILSAC GF-6A (except SAE 10W-40 and 20W-50)
  • API Service SP, SN PLUS with Resource Conserving (except SAE 10W-40 and SAE 20W-50 which are API SP, SN PLUS only)
GT-1 High Performance Motor Oil with LiquiTek meets or exceeds the requirements of:

  • Chrysler MS-6395
  • Ford WSS-M2C960-A1 (SAE 5W-20)
  • Ford WSS-M2C961-A1 (SAE 5W-30)
  • Ford WSS-M2C962-A1 (SAE 0W-20)
  • GM6094M (obsolete specification)

Additional Details:

SAE Grade 10W-30
Specific Gravity @ 60°F 0.866
Density, lbs/gal @ 60°F 7.21
Color, ASTM D1500 3.0
Flash Point (COC), °C (°F) 229 (444)
Pour Point, °C (°F) -30 (-22)
Viscosity, Kinematic
cSt @ 40°C 65.1
cSt @ 100°C 10.4
Viscosity Index 148
Cold Cranking Viscosity, cP 4,900
@ (°C) (-25)
High-Temp/High-Shear Viscosity, cP @ 150°C 3.0
Sulfated Ash, ASTM D874, wt % 0.8
Total Base Number (TBN), ASTM D2896 7.0
Phosphorus, wt % 0.077
Zinc, wt % 0.085

Licenses & Approvals:

GT-1 High Performance Motor Oil with LiquiTek is licensed for:

  • ILSAC GF-6A (except SAE 10W-40 and 20W-50)
  • API Service SP, SN PLUS with Resource Conserving (except SAE 10W-40 and SAE 20W-50 which are API SP, SN PLUS only)
GT-1 High Performance Motor Oil with LiquiTek meets or exceeds the requirements of:

  • Chrysler MS-6395
  • Ford WSS-M2C960-A1 (SAE 5W-20)
  • Ford WSS-M2C961-A1 (SAE 5W-30)
  • Ford WSS-M2C962-A1 (SAE 0W-20)
  • GM6094M (obsolete specification)

Additional Details:

SAE Grade 10W-40
Specific Gravity @ 60°F 0.869
Density, lbs/gal @ 60°F 7.25
Color, ASTM D1500 3.0
Flash Point (COC), °C (°F) 227 (440)
Pour Point, °C (°F) -30 (-22)
Viscosity, Kinematic
cSt @ 40°C 112
cSt @ 100°C 16.0
Viscosity Index 153
Cold Cranking Viscosity, cP 6,100
@ (°C) (-25)
High-Temp/High-Shear Viscosity, cP @ 150°C 4.1
Sulfated Ash, ASTM D874, wt % 0.8
Total Base Number (TBN), ASTM D2896 7.0
Phosphorus, wt % 0.077
Zinc, wt % 0.085

Licenses & Approvals:

GT-1 High Performance Motor Oil with LiquiTek is licensed for:

  • ILSAC GF-6A (except SAE 10W-40 and 20W-50)
  • API Service SP, SN PLUS with Resource Conserving (except SAE 10W-40 and SAE 20W-50 which are API SP, SN PLUS only)
GT-1 High Performance Motor Oil with LiquiTek meets or exceeds the requirements of:

  • Chrysler MS-6395
  • Ford WSS-M2C960-A1 (SAE 5W-20)
  • Ford WSS-M2C961-A1 (SAE 5W-30)
  • Ford WSS-M2C962-A1 (SAE 0W-20)
  • GM6094M (obsolete specification)

Additional Details:

SAE Grade 20W-50
Specific Gravity @ 60°F 0.881
Density, lbs/gal @ 60°F 7.35
Color, ASTM D1500 3.5
Flash Point (COC), °C (°F) 230 (446)
Pour Point, °C (°F) -30 (-22)
Viscosity, Kinematic
cSt @ 40°C 181
cSt @ 100°C 19.2
Viscosity Index 127
Cold Cranking Viscosity, cP 7,500
@ (°C) (-15)
High-Temp/High-Shear Viscosity, cP @ 150°C 4.9
Sulfated Ash, ASTM D874, wt % 0.8
Total Base Number (TBN), ASTM D2896 7.0
Phosphorus, wt % 0.077
Zinc, wt % 0.085