GT-1® Euro+ Motor Oil

Premium Full Synthetic Passenger Car Engine Oil for Diesel Powered European & North American Vehicles


Kendall® GT-1 Euro+ Motor Oil is a premium quality, full-synthetic, low-SAPS engine oil designed to provide maximum protection for European passenger cars under all operating conditions. It also is recommended for other vehicles operating at extreme temperatures or under severe driving conditions, such as towing heavy loads. It is recommended for use in many gasoline and light-duty diesel engines.

Features & Benefits

  • Exceptional resistance to viscosity and thermal breakdown at high temperatures
  • Protects against sludge and varnish formation
  • Low-ash formulation to protect against diesel particulate lter plugging
  • Excellent wear protection
  • Protects against rust and bearing corrosion
  • Low volatility for reduced oil consumption
  • Excellent low-temperature pumpability for protection during cold starts
  • Good foam resistance

Applications

  • Audi: diesel engines with DPF, extended drain
  • BMW: most diesel engines
  • Mercedes-Benz: most diesel engines
  • Volkswagen: diesel engines with DPF. extended drain
  • Passenger cars, light trucks and sport utility vehicles that do not require an ILSAC GF-5 oil for warranty coverage, especially when operating under severe driving conditions

Technical Details

5W-30

Licenses & Approvals

GT-1 Euro+ Motor Oil is licensed for:

  • API Service SN - SAE 5W-30

GT-1 Euro+ Motor Oil meets or exceeds the requirements of:

  • ACEA C3-12
  • API Service CF
  • Chrysler MS 11106

GT-1 Euro+ Motor Oil is fully approved for service ll under the following OEM specifications:

  • BMW Long Life LL-04
  • Mercedes Benz Sheet 229.51
  • Volkswagen Standard 504.00 & 507.00
  • Porsche C30

Additional Details

SAE Grade 5W-30
Specific Gravity @ 60°F 0.853
Density, lbs/gal @ 60°F 7.1
Color, ASTM D1500 3
Flash Point (COC), °C (°F) 216 (421)
Pour Point, °C (°F) -39 (-38)
Viscosity, Kinematic
cSt @ 40°C 80
cSt @ 100°C 12.2
Viscosity Index 164
Cold Cranking Viscosity, cP 5900
°C (-30)
High-Temp/High-Shear Viscosity, cP @ 150°C 3.6
Sulfated Ash, ASTM D874, wt % 0.8
Total Base Number (TBN), ASTM D2896 8.85
Phosphorus, wt % 0.0794
Zinc, wt % 0.0875