FOUR SEASONS HYDRAULIC FLUID AW

High-Quality Antiwear Hydraulic Oil

Kendall® Four Seasons Hydraulic Fluid AW is a high-quality antiwear hydraulic fluid developed for use in a wide variety of industrial and mobile hydraulic system applications. It meets the performance requirements of all major hydraulic pump manufacturers, and is recommended for use in all types of high-pressure, high-speed hydraulic pumps.

You are currently viewing FOUR SEASONS HYDRAULIC FLUID AW

Features & Benefits

  • Excellent wear protection for hydraulic pumps and motors
  • Excellent oxidation resistance and thermal stability
  • Protects against rust and corrosion
  • Excellent water-separating properties
  • Excellent filterability, even in the presence of a small amount of water
  • Good foam resistance

Applications

  • Hydraulic systems on industrial, mobile and marine equipment
  • Automated machine tools
  • Hydraulic elevators, hoists, presses and floor jacks
  • Marine cargo winches and steering systems
  • Mobile construction equipment
  • Service station lifts
  • Air tools and other pneumatic equipment lubricated through air line lubricators
  • Chain drives
  • Electric motor bearings
  • Lightly to moderately loaded enclosed industrial gear drives that do not require a compounded or extreme-pressure (EP) gear oil

Technical Details

  • ISO Grade: 32
  • Licenses & Approvals

    Four Seasons Hydraulic Fluid AW meets the requirements of the following industry and OEM specifications:

    #Bosch Rexroth RE 90220, Type HLP

    #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP

    #Eaton-Vickers I-286-S, M-2950-S, 35VQ25A anti-wear performance (brochure 03-401-2010 Rev 1 ISO 32, 46, and 68)

    #Fives Cincinatti P-68 ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68)

    #German Steel Industry SEB 181222

    #ISO 11158:1997, Family H (Hydraulic Systems), Type HM

    #Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46, and 68)

    #U.S. Steel 127

    Additional Details

    ISO Grade 32
    Specific Gravity @ 60°F 0.862
    Density, lbs/gal @ 60°F 7.18
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 216 (421)
    Pour Point, °C (°F) -37 (-35)
    Viscosity
    cSt @ 40°C 32.0
    cSt @ 100°C 5.4
    SUS @ 100°F 150
    SUS @ 210°F 44.0
    Viscosity Index 102
    Acid Number, ASTM D974, mg KOH/g 0.38
    Copper Corrosion, ASTM D130 1a
    Demulsibility, ASTM D1401, minutes to pass 10
    Foam Test, ASTM D892, Seq. I, mL 0/0
    FZG Scuffing Test, ASTM D5182, Failure Load Stage 12
    Oxidation Stability
    TOST, ASTM D943-04a, hours >5,000
    Rust Test, ASTM D665 A&B Pass
    Zinc, wt % 0.043
  • ISO Grade: 46
  • Licenses & Approvals

    Four Seasons Hydraulic Fluid AW meets the requirements of the following industry and OEM specifications:

    #Bosch Rexroth RE 90220, Type HLP

    #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP

    #Eaton-Vickers I-286-S, M-2950-S, 35VQ25A anti-wear performance (brochure 03-401-2010 Rev 1 ISO 32, 46, and 68)

    #Fives Cincinatti P-68 ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68)

    #German Steel Industry SEB 181222

    #ISO 11158:1997, Family H (Hydraulic Systems), Type HM

    #Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46, and 68)

    #U.S. Steel 127

    Additional Details

    ISO Grade 46
    Specific Gravity @ 60°F 0.869
    Density, lbs/gal @ 60°F 7.24
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 227 (441)
    Pour Point, °C (°F) -37 (-35)
    Viscosity
    cSt @ 40°C 46.0
    cSt @ 100°C 6.8
    SUS @ 100°F 214
    SUS @ 210°F 48.5
    Viscosity Index 102
    Acid Number, ASTM D974, mg KOH/g 0.38
    Copper Corrosion, ASTM D130 1a
    Demulsibility, ASTM D1401, minutes to pass 10
    Foam Test, ASTM D892, Seq. I, mL 0/0
    FZG Scuffing Test, ASTM D5182, Failure Load Stage 12
    Oxidation Stability
    TOST, ASTM D943-04a, hours >5,000
    Rust Test, ASTM D665 A&B Pass
    Zinc, wt % 0.043
  • ISO Grade: 68
  • Licenses & Approvals

    Four Seasons Hydraulic Fluid AW meets the requirements of the following industry and OEM specifications:

    #Bosch Rexroth RE 90220, Type HLP

    #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP

    #Eaton-Vickers I-286-S, M-2950-S, 35VQ25A anti-wear performance (brochure 03-401-2010 Rev 1 ISO 32, 46, and 68)

    #Fives Cincinatti P-68 ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68)

    #German Steel Industry SEB 181222

    #ISO 11158:1997, Family H (Hydraulic Systems), Type HM

    #Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46, and 68)

    #U.S. Steel 127

    Additional Details

    ISO Grade 68
    Specific Gravity @ 60°F 0.874
    Density, lbs/gal @ 60°F 7.27
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 238 (460)
    Pour Point, °C (°F) -33 (-27)
    Viscosity
    cSt @ 40°C 68.0
    cSt @ 100°C 8.7
    SUS @ 100°F 315
    SUS @ 210°F 54.9
    Viscosity Index 99
    Acid Number, ASTM D974, mg KOH/g 0.38
    Copper Corrosion, ASTM D130 1a
    Demulsibility, ASTM D1401, minutes to pass 10
    Foam Test, ASTM D892, Seq. I, mL 0/0
    FZG Scuffing Test, ASTM D5182, Failure Load Stage 12
    Oxidation Stability
    TOST, ASTM D943-04a, hours >5,000
    Rust Test, ASTM D665 A&B Pass
    Zinc, wt % 0.043
  • ISO Grade: 100
  • Licenses & Approvals

    Four Seasons Hydraulic Fluid AW meets the requirements of the following industry and OEM specifications:

    #Bosch Rexroth RE 90220, Type HLP

    #DIN 51524 Part 2, Anti-wear Hydraulic Oils, Type HLP

    #Eaton-Vickers I-286-S, M-2950-S, 35VQ25A anti-wear performance (brochure 03-401-2010 Rev 1 ISO 32, 46, and 68)

    #Fives Cincinatti P-68 ISO VG 32), P-70 (ISO VG 46), P-69 (ISO VG 68)

    #German Steel Industry SEB 181222

    #ISO 11158:1997, Family H (Hydraulic Systems), Type HM

    #Parker Hannifin (Denison) HF-0, HF-1, HF-2 (approved ISO 32, 46, and 68)

    #U.S. Steel 127

    Additional Details

    ISO Grade 100
    Specific Gravity @ 60°F 0.878
    Density, lbs/gal @ 60°F 7.31
    Color, ASTM D1500 0.5
    Flash Point (COC), °C (°F) 252 (486)
    Pour Point, °C (°F) -32 (-26)
    Viscosity
    cSt @ 40°C 100
    cSt @ 100°C 11.0
    SUS @ 100°F 463
    SUS @ 210°F 62.8
    Viscosity Index 94
    Acid Number, ASTM D974, mg KOH/g 0.38
    Copper Corrosion, ASTM D130 1a
    Demulsibility, ASTM D1401, minutes to pass 10
    Foam Test, ASTM D892, Seq. I, mL 0/0
    FZG Scuffing Test, ASTM D5182, Failure Load Stage 12
    Oxidation Stability
    TOST, ASTM D943-04a, hours >5,000
    Rust Test, ASTM D665 A&B Pass
    Zinc, wt % 0.043
Search this website Type then hit enter to search